Description and Application

The construction is suitable for use outdoor in ducts and for direct burial. It consists of a corrugated steel tape armouring providing full rodent protection. It is surrounded by glass yarns. The cable has a HDPE outer jacket.
The loose tube design has a capacity of up to 24 fibres.  Diameter of the fibres is 250 um.  Termination of these fibres is done with splicing of pigtails.
The cable is watertight due to the gel in the loose tube and the watertight glass yarns.

CONSTRUCTION

LEGEND ACCOMPANYING THE CROSS SECTION DRAWING:

1. Optical fibres (250 um)
2. Gel
3. Loose tube
4. Reinforced watertight glass yarns
5. Corrugated steel tape armour(PSP)
6. PE outer jacket with UV resistant additive

CHARACTERISTICS

• Outdoor cable for installation in a duct or direct burial
• Designed for termination by splicing
• Central loose tube design
• Corrugated steel protection
• Waterproof structure, rodent resistant and UV-resistant
• Available in all fibre grades
• Available from 2-24 fibres

MECHANICAL CHARACTERISTICS

• Mechanical resistance to impacts                                     IEC60794-1-E4
• Crush resistance, long/short term                                     IEC60794-1-E3
• Maximum pulling force, long/ short term                      IEC60794-1-2-E1
• Usage characteristics Flame retardant                              IEC60332-1
• Ambient installation temperature, rang                            0..40℃
• Operating temperature, range                                           -20..60℃
• Storage temperature, range                                                -30..60℃